Panoramic Power Wireless Sensor
The Panoramic Power sensor series is made up of non-invasive, self-powered, miniature
wireless current sensors. The sensors clamp on the electrical outgoing wire from the
circuit breaker and are self-powered by the circuit’s magnetic field. Hundreds of sensors
can be installed in a few hours with no disturbance to daily operations. Once installed,
the sensors become part of the building infrastructure, never requiring maintenance,
service or battery replacement
– Non-invasive — snaps and fits
without disconnection
– No maintenance; self-powered
– High accuracy
– Wireless — no wiring, unlike
standard CT-based monitoring
systems
-Real-time current data
transmitted every 10 seconds
Physical Dimensions: 46.2 x 22.8 x 32.6 mm
1.82 x 0.90 x 1.28 inch
Max Hot-wire Outer: 18.8 mm
Diameter (including insulation): 0.74 inch
Current Measurement Range: 0—225 A
Current Measurement Accuracy: Typically <2% at I > 10 A
Minimum Operating Current: 0.7—1.2 A (typical)
AC Frequency Supported: 50 Hz (EU, JPE versions)
60 Hz (US, JPW version)
Transmission Frequency: 434 MHz (EU version)
915 MHz (US version)
923 MHz (JPE, JPW versions)